[chuuey]

thanks a lot Sean!

[chuuey]

hey Sean, i've just checked and there's a map_ini_100124.zip out there

[bungiefan]

chuuey, on 16 February 2010 - 11:45 PM, said:

hey Sean, i've just checked and there's a map_ini_100124.zip out there

http://ux.getuploade..._ini_100221.zip is password-protected, and I don't know how to find the password. All I can decipher is something about using 2-byte characters, which likely means Japanese text.

[chuuey]

yeah... our only hope is someone who has access to the forums out there and knows it

[FmT]

Password to new .ini files is in the mailto: when you point the name. Actually something like BADetc.

I wanted to point out a problem between maps name and map.ini. I can give an easy example : Alzadaal Undersea Ruins 12. It's the zone you using to go from Dvucca staging point to Nashmau to go Odin or Einherjar. Apradar don't show that map for me.
Line in the .ini for the zone is :
48_b=0.2,214,-0.2,241,-590,-10000,430,-190,10000,790
and map name is 48_11.gif.
The line is right since it's working with ffassist mapviewer plugin correctly.

I wanted to make it works with apradar, so I tried to rename to 48.b.gif or 48.20.gif etc with no go. But if I modify the line like :
48_0=0.2,214,-0.2,241,-590,-10000,430,-190,10000,790
and rename the map file to 48_0.gif it works. So the map gif is correct and the line too... it's only apradar fault, as it can support only zone XX_0 to XX_9, and if zone have more than 10 maps it fails (XX_a to XX_f and even XX_10 to XX_XX).

So that may explain some maps don't work anymore ( Pso'Xja, Ghoyus Reverie, Ruthotz Silvermines, Temenos) because they are more than 10 maps for theses zones.

[chuuey]

hey, i didn't quite get where to look for it, i mean it's on the website after pointing at the file? Just the filename shows up for me, no mailto: anyway if you could lend me a hand i'd appreciate it, been hunting for a while now

[dino0211]

FmT, on 30 March 2010 - 01:50 AM, said:

Password to new .ini files is in the mailto: when you point the name. Actually something like BADetc.

I wanted to point out a problem between maps name and map.ini. I can give an easy example : Alzadaal Undersea Ruins 12. It's the zone you using to go from Dvucca staging point to Nashmau to go Odin or Einherjar. Apradar don't show that map for me.
Line in the .ini for the zone is :
48_b=0.2,214,-0.2,241,-590,-10000,430,-190,10000,790
and map name is 48_11.gif.
The line is right since it's working with ffassist mapviewer plugin correctly.

I wanted to make it works with apradar, so I tried to rename to 48.b.gif or 48.20.gif etc with no go. But if I modify the line like :
48_0=0.2,214,-0.2,241,-590,-10000,430,-190,10000,790
and rename the map file to 48_0.gif it works. So the map gif is correct and the line too... it's only apradar fault, as it can support only zone XX_0 to XX_9, and if zone have more than 10 maps it fails (XX_a to XX_f and even XX_10 to XX_XX).

So that may explain some maps don't work anymore ( Pso'Xja, Ghoyus Reverie, Ruthotz Silvermines, Temenos) because they are more than 10 maps for theses zones.

Thank You for all that helpful information FmT

[FmT]

The password is in the BBS (forum) and wil allways be. Link for the index of the BBS for ffassist is : Click here
Get in the last topic by choosing the 1st ( らくまっしぐら 31 actually )

[chuuey]

awesome, thanks a lot

[Nerji]

I can't find the p/w for the map.ini, mind pming me it?

Thanks.


Edit: nvm found it! didnt realise i had to expand the topic

This post has been edited by Nerji: 20 April 2010 - 10:38 AM

[Sean]

FmT, on 30 March 2010 - 01:50 AM, said:

So the map gif is correct and the line too... it's only apradar fault, as it can support only zone XX_0 to XX_9, and if zone have more than 10 maps it fails (XX_a to XX_f and even XX_10 to XX_XX).

So that may explain some maps don't work anymore ( Pso'Xja, Ghoyus Reverie, Ruthotz Silvermines, Temenos) because they are more than 10 maps for theses zones.

You're quite right! I found it soooo frustrating to try and have some complete Limbus maps . . . the ones now work perfectly only because Apollyon has been shortened down to one map for each area with all floors. For Temenos, you can use the batch files in the Limbus Maps folder to swap them according to which zone you are in. Only being able to have 10 maps for a zone seems really limiting for both FFAssist and Apradar ><

BTW, a new map pack and map.ini are in the original post. Not much has changed really, just the ini.

Cheers

This post has been edited by Sean: 24 April 2010 - 09:35 PM

[dragonbladez]

Ok I'm not sure if this as been ask and I didn't want to read though all the post here. So my question could the these maps be convert to .dats and swap with the in-game maps? And if so could you or someone who is more ale then me I'm sure many of us in the windower group would love to see this.

[FmT]

Sean, on 25 April 2010 - 11:35 AM, said:

You're quite right! I found it soooo frustrating to try and have some complete Limbus maps . . . the ones now work perfectly only because Apollyon has been shortened down to one map for each area with all floors. For Temenos, you can use the batch files in the Limbus Maps folder to swap them according to which zone you are in. Only being able to have 10 maps for a zone seems really limiting for both FFAssist and Apradar ><

FFassist working fine with all map. Only apradar cannot support more than 10maps. Apnea saying : "That is an inconsistency between the ini and the map name." and it's obviously not.

[Sean]

FmT, on 25 April 2010 - 02:37 AM, said:

FFassist working fine with all map. Only apradar cannot support more than 10maps. Apnea saying : "That is an inconsistency between the ini and the map name." and it's obviously not.

I use FFAssist when I am in Limbus, and I have found that Temenos will only work if I use my little batch files (in my Limbus Maps folder) to switch maps around . . . it doesn't seem able to support more than 10 in there.

dragonbladez, on 25 April 2010 - 02:28 AM, said:

Ok I'm not sure if this as been ask and I didn't want to read though all the post here. So my question could the these maps be convert to .dats and swap with the in-game maps? And if so could you or someone who is more ale then me I'm sure many of us in the windower group would love to see this.

I would love to see this too, and anyone is able to use anything I have compiled, but I have no idea how to make them into dats. Sorry.

This post has been edited by Sean: 25 April 2010 - 10:28 AM

[chuuey]

thanks very much for the update Sean

[dtjondro]

Does anyone have the Map Pack uploaded? I cannot download it from the link give ; ;. Thank you.

[Ecstazy]

I am also having problems downloading the map pack from Filefront. Could someone re-upload the maps please?

Greatly appreciated,

Ecstazy

[NewbLuck]

Ecstazy, on 18 May 2010 - 08:41 AM, said:

I am also having problems downloading the map pack from Filefront. Could someone re-upload the maps please?

Greatly appreciated,

Ecstazy

http://www.megaupload.com/?d=SL6I685U

[Ecstazy]

NewbLuck, on 19 May 2010 - 04:45 AM, said:

http://www.megaupload.com/?d=SL6I685U

Thanks alot.

[troyBORG]

I can't get it to download the maps. I keep getting:

Quote

File is Unavailable.


The file you are attempting to download is not currently available on our servers or is being processed. Please try your download in a few minutes.